High Hardness Kitchen Table Ab Adhesive Coating Epoxy Resin and Hardener Transparent Best Epoxy and Resin Stone Coutertops

Basic Info

CAS No.	25068-38-6
Formula	C15h16o2c2h7onc3h5ocl
EINECS	231-072-3
Bonding Function	Pressure sensitive Adhesive
Morphology	Water-Soluble
Application	Construction, Marble Stone Top Coating
Material	Epoxy
Classification	Top Coating
Main Agent Composition	Natural Polymer
Characteristic	Waterproof
Promoter Composition	Curing Agent
Composition	Organic Material
Color	Clear
Type	Double Components Adhesives
Mixing Ratio	3:1
Certificate	RoHS,Reach, PAHs, ASTM
Life Time	Anti-Yellow at 5yrs+
Grade	Food Grade Resin
Voc	Low Voc Low Odor
Ripple	No Ripple
Leveling	Self-Leveling and Extremely Durable
UV	UV Resistant
Solids	100% Solids
Transport Package	Barrel/ Carton/ Wooden Box
Specification	1KG/5KG/20KG/50KG/ 200KG
Trademark	HF
Origin	Guangdong
HS Code	3506912000
Production Capacity	5000000 Tons/Year

Packaging & Delivery

Package size per unit product 15.00cm * 5.00cm * 5.00cm Gross weight per unit product 1.000kg

Product Description

HF Chemical High Hardness Epoxy AB Glue Resin For Wood Table Top Coat

Product Parameters

Item (HF3001)	Epoxy Resin(A )	Epoxy Resin(B )
Color	Transparent Liquid	Transparent Liquid
[email protected]ºC(mpa.s)	775	50
Mix Ratio(by weight)	3	1
Hardness(Shored)	90
Operation time(100g mixed glue ,25ºC)	40 Minutes
Curing Time(25ºC)	24 Hours
Suddenly Mixed Volume	1 Liter
Shelf Time	12 Months

FeatureEpoxy resin HF3001 is special formula for Stone/ Marble Countertop with bright surface

* No Toxic Organic Compounds or Heavy Metals

* 100% Solids, Low VOC, Low odor,UV resistant

* Self-Leveling and Extremely Durable

* Crystal Clear, High Gloss and Excellent Color Stability

*Not whitish, no bubbles

*Anti-yellow for at least five years

*Food grade resin, wear-resistant

Detailed Photos

 

More Applications

Wooden furniture, top coating, DIY craft casting, epoxy floor, soft doming resin, etc... Customize specification can be availabe for you, please contact with us

Free samples are available! Please contact us for more details and tell us what you need!

Packaging & Shipping

Our Advantages

Free samples are available! Please contact us for more details and tell us what you need!

Customers Feedback

FAQ

How to useStep 1: The ideal working temperature is around a constant 77°F. Best results can be obtained at constant temperatures between 70°F and 85°F, in a clean, dry, dust-free environment. Avoid working in high humidity. We recommend using this product on a leveled and flat work surface. Step 2: Measure product in accordance with your intended use. Prepare 2 parts Base Resin to 1 part Curing Agent by liquid volume.Pour the Curing Agent first and then the Base Resin into a clean, smooth-sided container large enough to hold all the liquid and allow room for mixing. Step 3: The material must be mixed thoroughly for at least 3 minutes. Be sure to scrape the container sides, bottom, and corners as you mix. Be careful not to whip excessive air into the mixture. If mixing a gallon, use a power mixer set to "hand speed." For smaller quantities, use stir sticks. Do not mix more than a gallon. Pour into a new, clean container and mix for an additional minute. Step 4: Pour the mixed resin onto the surface and distribute evenly with a squeegee or gloved hand. Continue to pour remaining material to achieve the desired thickness, allowing the resin to flow evenly over the project's sides. Resin can be poured up to 1/4" thick per pour. Step 5: Use a heat source such as a heat gun to remove any bubbles by adding a small amount of heat to the surrounding area. The bubble will rise to the surface and pop. Step 6: If you are going to make a second pour, the first pour should still be slightly sticky. Once the second pour is made, bubbles may once again need to be removed. Material will feel hard after 45-60 minutes, cure to the point of workability within 24 hours, but full cure and maximum hardness can require up to 7 days, depending upon the temperature.Free samples are available! Please contact us for more details and tell us what you need!