Professional Manufacturers Imported Transparent Clear LED Strip Light Potting Soft Epoxy Resin

Basic Info

Model NO.	HF103-8
Morphology	Water-Soluble
Application	Construction, Fiber & Garment, LED Strip Light Potting
Material	Epoxy
Classification	Room Curing
Main Agent Composition	Natural Polymer
Characteristic	Waterproof
Promoter Composition	Curing Agent
Composition	Organic Material
Color	Clear
Type	Double Components Adhesives
Mixing Ratio	1:1
Certificate	RoHS,Reach, PAHs, ASTM
Life Time	Anti-Yellow at 5yrs+
Grade	Food Grade Resin
Voc	Low Voc Low Odor
Ripple	No Ripple
Leveling	Self-Leveling and Extremely Durable
UV	UV Resistant
Solids	100% Solids
Transport Package	Barrel/ Carton/ Wooden Box
Specification	1KG/5KG/20KG/50KG/ 200KG
Trademark	HF
Origin	Guangdong
HS Code	3506912000
Production Capacity	5000000 Tons/Year

Product Description

Professional Manufacturers Imported Transparent Clear Led Strip Light Potting Soft Epoxy Resin

Product Parameters

Item (HF103)	Epoxy Resin(A )	Epoxy Hardener (B )
Color	Transparent Liquid	Transparent Liquid
[email protected]ºC(mpa.s)	700-1500 CPS	1200-1500 MAXCPS
Specific Gravity	1.15	1.95
Mix Ratio(by weight)	1	1
Hardness(Shored)	40 D
Operation time(100g mixed glue ,25ºC)	30 Minutes(100g)
Curing Time(25ºC)	12-76 Hours
Shelf Life	12 Months

FeatureEpoxy resin HF103 can be cured under normal temperature and high temperature, with the feature of moderate viscosity, goodflowing property, natural defoaming, anti-yellow, high transparency, no ripple, bright in surface, good flexibility.Specially used for LED strips, and clear drop glue for some labels, ornaments and stickers.

* No Toxic Organic Compounds or Heavy Metals

* 100% Solids, Low VOC, Low odor,UV resistant

* Supersoft & Clear

*Not whitish, no bubbles

*Anti-yellow for at least five years

*Food grade FDA approved resin

Detailed Photos

More Applications

Free samples are available! Please contact us for more details and tell us what you need!

Packaging & Shipping

Our Advantages

Free samples are available! Please contact us for more details and tell us what you need!

Customers Feedback

FAQ

How to useStep 1: The ideal working temperature is around a constant 77°F. Best results can be obtained at constant temperatures between 70°F and 85°F, in a clean, dry, dust-free environment. Avoid working in high humidity. We recommend using this product on a leveled and flat work surface. Step 2: Measure product in accordance with your intended use. Prepare 2 parts Base Resin to 1 part Curing Agent by liquid volume.Pour the Curing Agent first and then the Base Resin into a clean, smooth-sided container large enough to hold all the liquid and allow room for mixing. Step 3: The material must be mixed thoroughly for at least 3 minutes. Be sure to scrape the container sides, bottom, and corners as you mix. Be careful not to whip excessive air into the mixture. If mixing a gallon, use a power mixer set to "hand speed." For smaller quantities, use stir sticks. Do not mix more than a gallon. Pour into a new, clean container and mix for an additional minute. Step 4: Pour the mixed resin onto the surface and distribute evenly with a squeegee or gloved hand. Continue to pour remaining material to achieve the desired thickness, allowing the resin to flow evenly over the project's sides. Resin can be poured up to 1/4" thick per pour. Step 5: Use a heat source such as a heat gun to remove any bubbles by adding a small amount of heat to the surrounding area. The bubble will rise to the surface and pop. Step 6: If you are going to make a second pour, the first pour should still be slightly sticky. Once the second pour is made, bubbles may once again need to be removed. Material will feel hard after 45-60 minutes, cure to the point of workability within 24 hours, but full cure and maximum hardness can require up to 7 days, depending upon the temperature.Free samples are available! Please contact us for more details and tell us what you need!